Products
PR-03WB1
PR-03 w/Titanium Bridge PlateWB-1
Add to Wish List
"PR-03" titanium bass saddles are pre-assembled with titanium mounting plate. Designed to replace standard J-Bass® bridges. Also adaptable for "Fender Vintage Style" and Precision Bass® bridges.
$149.00
PR-04
Synchronized Tremolo Bridge Saddles - 2 1/8" Spacing
Add to Wish List
This press-saddle is designed to mach the Japanese synchronized tremolo bridges made by Gotoh® and others. The string pitch is 10.8m/m.
PR-04 Specs
$103.00
PR-05
Gotoh® Tune-O-Matic Bridge
Add to Wish List
Designed to match GE-103B, GE-103BT which is made by GOTOH® (Japanese parts manufacturer) Gotoh bridges are often used as replacement parts for relatively expensive models made by guitar manufacturers. String groove is pre-filed on center of the saddle.
PR-05 Specs
$67.00
PR-06
Gibson® Nashville Style T-O-M Bridge
Add to Wish List
Designed to match Gibson®’s original bridge: “BR-030”. As with the original parts, it has not been manufactured with a string groove. After applying saddle to bridge base, trim it to match strings pitch. You can use regular file for trimming...
$67.00
PR-06set
PR-06 set Nashville Style Bridge Set
Add to Wish List
PR-06 titanium saddles are pre-assembled with zinc die cast base. This bridge base is not Gibson®'s original parts. But it can be used as a replacement for the original Nashville Tune-O-Matic Bridge. Also you can use this bridge on some...
$144.00
PR-08
For Tele 3pcs. style Bridge
Add to Wish List
Two-string per saddle model for the Telecaster® manufactured by Fender Japan®. Strings pitch is 10.8m/m. It can be attached to the USA manufactured Telecaster® as well. A slight string groove has been manufactured directly on the saddle. The screw is...
$93.00
PR-08Quattro
For Tele 3pcs. style Bridge '68 style
Add to Wish List
Saddles from late 1954 were the plain steel barrel type with no grooves. They were .250” in diameter. After mid 1958 the plain steel saddles were replaced by the .250” diameter threaded saddles that remained a standard part until sometime...
$93.00
PR-08WD
For Tele 3pcs. style (slant)
Add to Wish List
Facing in the string direction, the saddle adjusts obliquely to improve the octave tuning function which has previously been the drawback with the standard two-strings-per saddle model saddles. Stability improves for high position chords as well. It can be attached...
$123.00
PR-11
Synchronized Tremolo Bridge (USA Style) - 2 7/32" Spacing
Add to Wish List
Designed to match Stratocasters® made in USA and Mexico. The screw pich follows "Inch" standard.
PR-11 Specs
$103.00
PR-14
Synchronized Tremolo Bridge - Narrow 2 1/16" Spacing
Add to Wish List
This narrower pitch (.413in) saddle is compatible with PRS and most of guitars made in Asia.
PR-14 Specs
$103.00
PR-15
Synchronized Tremolo Bridge (Offset Style) - 2 1/16" Spacing
Add to Wish List
This offset type saddle can be used for US made Standard Stratocasters® and Strat® Plus.
PR-15 Specs
$103.00
PR-16
6-piece Tele Barrel Saddles
Add to Wish List
Discontinued 6-piece barrel saddles for Tele bridges.
PR-16 Specs
$103.00
PR-17
Block Style Saddles - 2 1/16" Spacing
Add to Wish List
This block type titanium saddle can be used on most Strat type guitar bridges including the current American Standard, PRS, Gotoh GTC101 and many others.
PR-17 Specs
$246.00
PR-18
Block Style Saddles - 2 1�„8" Spacing
Add to Wish List
Introducing our new block style saddles PR-18 which have 10.8mm pitch to fit Gotoh 510, GE1088,1089 etc. The new PR-18 can be installed perfectly on 10.8mm pitch (2.125" E to E spacing) bridge without any gap between the saddles. PR-18...
$246.00
PR-Mu
6piece Mustang®, Jaguar®, Jazz Master® style saddles
Add to Wish List
There are no height screws in the saddles and each saddle is a different diameter so that they sit at different heights to compensate for the fingerboard radius. The Fender original Mustang saddles are assembled into the bridge loosely. Our...
$226.00
PRG "The Key" Intonation Tool
Add to Wish List
The Key makes intonating an Original Floyd Rose?«?átremolo easy and precise. Simply slip the Key into place over the string lock screw, loosen the saddle mounting screw, and enjoy fingertip control of the saddle position for accurate intonation.?á
$23.00
-
Black
PRG A-Frame Ukulele Stand
Add to Wish List
The ProRockGear A-frame Ukulele Stand is designed to be a lightweight yet sturdy solution to keeping your favorite uke off the ground. Metal A-frame style collapses for easy transport and rubber molding protects your instrument's finish. Rubber end caps prevent...
$13.45
PRG ABS Series 10 Unit Rack Case
Add to Wish List
The RG-RC10U accommodates 10 rack mountable items. Constructed of a durable ABS outer shell and featuring steel claw fasteners, heavy duty handles that provide secure grasping points and universal mounting rails with hardware included. Interior Width: 19" (rail mount to rail...
$122.75
PRG ABS Series 12 Unit Rack Case
Add to Wish List
The RG-RC12U accommodates 12 rack mountable items. Constructed of a durable ABS outer shell and featuring steel claw fasteners, heavy duty handles that provide secure grasping points and universal mounting rails with hardware included. Interior Width: 19" (rail mount to rail mount)...
$130.80
PRG ABS Series 2 Unit Rack Case
Add to Wish List
The RG-RC2U accommodates 2 rack mountable items. Constructed of a durable ABS outer shell and featuring steel claw fasteners, heavy duty handles that provide secure grasping points and universal mounting rails with hardware included. Interior Width: 19" (rail mount to rail mount)...
$81.45
PRG ABS Series 3 Unit Rack Case
Add to Wish List
The RG-RC3U accommodates 3 rack mountable items. Constructed of a durable ABS outer shell and featuring steel claw fasteners, heavy duty handles that provide secure grasping points and universal mounting rails with hardware included. Interior Width: 19" (rail mount to rail mount)...
$84.45
PRG ABS Series 4 Unit Rack Case
Add to Wish List
The RG-RC4U accommodates 4 rack mountable items. Constructed of a durable ABS outer shell and featuring steel claw fasteners, heavy duty handles that provide secure grasping points and universal mounting rails with hardware included. Interior Width: 19" (rail mount to rail mount)...
$92.10
PRG ABS Series 6 Unit Rack Case
Add to Wish List
The RG-RC6U accommodates 6 rack mountable items. Constructed of a durable ABS outer shell and featuring steel claw fasteners, heavy duty handles that provide secure grasping points and universal mounting rails with hardware included. Interior Width: 19" (rail mount to rail mount)...
$103.20
PRG ABS Series 8 Unit Rack Case
Add to Wish List
The RG-RC8U accommodates 8 rack mountable items. Constructed of a durable ABS outer shell and featuring steel claw fasteners, heavy duty handles that provide secure grasping points and universal mounting rails with hardware included. Interior Width: 19" (rail mount to rail mount)...
$114.90
